|
|
 |
|
|
|
|
Enterprise Access
MICROSENS range of building installation products provides an
intelligent combination of fiber optic and twisted pair technology to
deliver optimized performance and ensure the long term security of
investment. MICROSENS extends the product range with manageable switches
for installation into cable truncs and new multiport media converters. |
|
|
|
|
Chassis |
Plug-in Modules |
|
GBIC's |
|
|
|
|
Chassis
|
|
|
|
|
|
Modular Enterprise Chassis 4 HU with 28 Slots
With the modular access platform, MICROSENS offers an open system for a
large number of function modules. These are designed both for LAN and
WAN applications and also for the implementation of telecommunications
and industrial interfaces. |
|
|
Modular Carrier Chassis 7 HU with 54 Slots
With the modular access platform, MICROSENS offers an open system for
a large number of function modules. These are designed both for LAN and
WAN applications and also for the implementation of telecommunications
and industrial interfaces. |
|
|
|
|
Modular Enterprise Chassis 3 HU with 3 Slots
In central distribution centres the requirement of converting existing
connections into different media is demanded. |
|
 |
Modular Enterprise Chassis 3 HU with 14 Slots
The Microsens 19" patch panel houses a maximum of 12 media converter
insertion cards and one PSU. |
|
|
|
|
Desktop Chassis for Converter Modules
Modular media converters from MICROSENS are based on the
broadest available range of application modules for media
conversion. Depending on the relevant application, users have
the choice between over 100 variants. The functionality modules
are installed in suitable cabinets. |
|
|
|
Top |
|
|
|
|
|
|
Plug-in Modules
|
|
|
|
|
4 Channel Optical Crossbar
The new module is part of the MICROSENS access platform and
offers full 3R signal regeneration bundled with a free
configurable crossbar matrix for data rates from 100 Mbps up to
2.7 Gbps.
|
|
 |
Ethernet Media Converter 10Base-FL/TP
The MICROSENS Ethernet Media Converter allows the direct
connection of twisted pair and FO-segments in an Ethernet network,
according to the IEEE 802.3 standard, without the need for a repeater.
|
|
|
|
|
Ethernet Media Converter 10Base-T/2
Media Converter for Ethernet IEEE 802.3. The MICROSENS 10Base-T/10Base-2
media converter permits the connection of coaxial cable (10Base-2) and
twisted pair cable (10Base-T) in an Ethernet network (iEEE 802.3).
|
|
 |
Ethernet Media Converter 2 Port 10Base-FL/TP
·5 Port Switch, 5x10/100Base-TX
The MICROSENS Ethernet Media Converter allows the direct connection of
twisted pair and FO-segments in an Ethernet network, according to the
IEEE 802.3 standard. |
|
|
 |
Fast Ethernet 2 Port Multifunction Bridge
MICROSENS multimode / single mode media converter enables the
transparent and bidirective connection of single mode and multimode
fibre optic lines.
|
 |
Fast Ethernet Bridge 10/100Base-TX/FX
The use of the bridge offers the connection of Ethernet and Fast
Ethernet segments according to IEEE802.3u, doing speed adaption at the
same time. |
|
|
Top |
|
|
|
 |
Fast Ethernet Media Converter 100Base-FX/TX
The MICROSENS Fast Ethernet Media Converter Module enables the
direct coupling of twisted pair (100Base-TX) and fiber optical segments
(100Base-FX) in a Fast Ethernet network.
|
 |
Fast Ethernet Media Converter 2 Port 100Base-FX/TX
The MICROSENS Fast Ethernet Media Converter Module enables the
direct coupling of twisted pair (100Base-TX) and fiber optical segments
(100Base-FX) in a Fast Ethernet network. |
|
|
 |
Fast Ethernet Switch Module 4x10/100Base-TX , 1x100Base-FX
This Ethernet switch module is supplied with four 10/100TX ports
and one 100Base-FX fiber optic port. An alarm contact is used for
driving external alarm devices.
|
 |
Gigabit Ethernet 3-port Converter Module 1000Base-T/X
The new access module allows for three-fold Gigabit Ethernet media
conversion (3x 1000Base-T to 1000Base-X) and is based on modular SFP
connections. This modular design makes the access module particularly
flexible. |
|
|
 |
Gigabit Ethernet Bridge 10/100/1000Base-T
The new Gigabit Ethernet Bridge offers speed adaptation for Ethernet,
Fast Ethernet and Gigabit Ethernet copper networks (10/100/1000Base-T)
and simultaneous conversion to optical fiber.
|
 |
Gigabit Mode Converter with 3R Signal Regeneration
Transparent converters enable the coupling of communications
equipment such as switches, routers and bridges over long single mode
distances in LAN, MAN and WAN environments. |
|
|
|
Gigabit Media Converter 1000Base-TX/SX/LX
As the workplaces are connected mostly through the Fast Ethernet
links, bandwidths in the backbone are needed, which will allow the users
to use their bandwidths effectively. Up to now such topologies like ATM,
FDDI and Fibre Channel were used here. |
 |
Gigabit Multimode Extender
Gigabit Extender enables Gigabit transmissions via multimode optic fiber
of up to two kilometers. MICROSENS expands its Enterprise Access product
range by a Gigabit Extender for multimode fiber optic transmissions.
|
|
|
 |
ITU G.703 Fiber Optic Converter
The MICROSENS ITU G.703 Optical Converter enables the full duplex
transmission of a 2,048 Mbit/s interface along optical fiber according
to the ITU G.703 standard.
|
|
RS-232 /Fiber Converter Module
The MICROSENS RS-232 Multiplexer Module enables the transparent
transmission of four RS-232/V.24 interfaces including hardware-handshake
via a duplex optical fiber. |
|
|
 |
RS-232/V.24 Fiber Multiplexer Module
The MICROSENS RS-232 Multiplexer Module enables the transparent
transmission of four RS-232/V.24 interfaces including hardware-handshake
via a duplex optical fiber. |
 |
SNMP Management Module
SNMP agent module for the management of MICROSENS 19 " modular system.
The special functions of all converter modules can be accessed using the
MICROSENS specific enterprise MIB (Management Information Base).
|
|
|
|
Token Ring / Fiber Media Converter
The MICROSENS Token Ring Media Converter Module enables the
conversion of electrical Token Ring segments to fiber optics according
to the IEEE 802.5J standard.
|
 |
Transparent Gigabit Media Converter Single mode/Multimode
MICROSENS multimode / single mode media converter enables the
transparent and bidirective connection of single mode and multimode
fibre optic lines.
The Single mode fibre is the best solution in the telecommunication and
information fields with high data rates |
|
|
 |
Transparent Converter Module Multimode/Single mode
MICROSENS´s Media Converter enables the transparent, bi-directional
connection from multimode to single mode fiber optic.
|
|
|
|
|
GBIC's
|
|
|
|
 |
GBIC Transceiver
The concept of the GBICs (Gigabit Interface Converter) is based on a
pluggable transceiver solution (optical transmitter and receiver). Due
to the multisource agreement (MSA) of different manufacturers there is a
standardized mechanical and electrical interface defined. So the
exchange of modules from different manufacturers is possible.
|
 |
SFP for Gigabit Ethernet with simplex Option (WDM)
The new SFP-transceiver from MICROSENS allows a bidirectional optical
transmission over one simplex single mode fiber. This is possible due to
the use of two different wavelengths (WDM – Wavelength Division
Multiplex) and the integration of a wavelength sensitive filter.
|
|
|
 |
Transceiver SFP
Beside the standard SFPs with 850/1310/1550 nm MICROSENS offers special
CWDM transceiver (Coarse Wavelength Division Multiplexing) to extend
capacities on existing fiber links. One simple WDM version offers the
bidirectional transmission over one simplex single mode fiber.
|
|
|
Top |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
